Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MOMO FORCE Settings
#1
Boas Malta,

Ontem o meu paizinho dicidiu vir dar umas voltinhas aqui no pc... como é o às do volante e dos pc's acabou por me desconfigurar completamente os controlos do jogo... LOL... Agora tou a ver-me às aranhas para colocar tudo como tinha. Aproveito assim para vos pedir 5 minutitos e me colocarem aqui os vossos settings deste estrondoso voltante.

Abraços
[Image: bentobanner2.jpg]
Reply
#2
:biggrinbandit::biggrinbandit::biggrinbandit::biggrinbandit:

olha o mail..........................................
[Image: banner-site.jpg]
Reply
#3
Boas!

Ja jogo a algum tempo, mas so agora e que decidi comprar um volante.Escolhi o momo. Noto que sou em media 4seg mais lento de volante.Alguem me pode dar uma ajuda nas configuracoes para o mesmo?!


Cumprimentos
[Image: MR-Corse-logo.png]
Reply
#4
Boas Slash,

Olha andei a ver alguns foruns e com a ajuda de alguns companheiros tenho os settings do volante assim:

no control panel:

FFB Device Settings:
Overall Effect = 96

Spring Effect = 40

Damper Effect = 26

Enable Centering Spring etc = checked mas a 0% (causa instabilidade acima disso)

Report COmbined Pedals = Unchecked

Settings:
Deves ir ao teu ficheio PLR e alterar as seguintes linhas (basta copy paste)

FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad.
FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom.
FFB Gain="0.76000" // Strength of Force Feedback effects. Range 0.0 to 1.0.
FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis.
FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis.
FFB steer vibe freq mult="0.20000" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration.
FFB steer vibe zero magnitude="0.03500" // Magnitude of steering vibration at 0mph (reference point).
FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude).
FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB steer force average weight="0.99000" // How much weight is given to new steering force calculations each frame (0.01 - 1.0). Lower values will smooth out the steering force, but will also add latency.
FFB steer force exponent="0.80000" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity.
FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction).
FFB steer force output max="1.80000" // Maximum force output of steering force, recommendation 0.8 to 2.0
FFB steer force grip weight="0.98000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force.
FFB steer force grip factor="0.98000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6. How much of a factor the front wheel grip is on the steering weight.
FFB steer update thresh="0.01500" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate.
FFB steer friction coefficient="0.17500" // Coefficient to use for steering friction. Range: -1.0 to 1.0
FFB steer friction saturation="1.00000" // Saturation value to use for steering friction. Range: 0 - 1.0
FFB steer damper coefficient="0.17500" // Coefficient to use for steering damper. Range: -1.0 to 1.0
FFB steer damper saturation="1.00000" // Saturation value to use for steering damper. Range: 0 - 1.0
FFB throttle vibe freq mult="0.17000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50
FFB throttle vibe zero magnitude="0.09000" // Magnitude of engine vibration at 0rpm (reference point).
FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude).
FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB throttle vibe update thresh="0.08000" // Amount of change required to update throttle vibe (0.0 - 1.0)
FFB brake vibe freq mult="0.90000" // Scales actual brake rotational frequency to force feedback vibration frequency.
FFB brake vibe zero magnitude="0.10000" // Magnitude of brake vibration at 0mph (reference point).
FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude).
FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB brake vibe update thresh="0.05000" // Amount of change required to update brake vibe (0.0 to 1.0)
FFB rumble strip magnitude="0.35000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect.
FFB rumble strip freq mult="0.75000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev.
FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down.
FFB rumble strip pull factor="-1.00000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5.
FFB rumble strip update thresh="0.07500" // Amount of change required to update rumble strip effect (0.0 - 1.0)
FFB jolt magnitude="1.00000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.


Espero que te ajude

Abraço
[Image: bentobanner2.jpg]
Reply
#5
Desde ja agradeco a ajuda, so gostaria de saber onde posso encontrar tal ficheiro (PLR). Peco desculpa mas tenho o voltante a pouco tempo e nao estou muito dentro do assunto.

Cumprimentos
[Image: MR-Corse-logo.png]
Reply
#6
Boas Slash,

Não há prob!

Encontras o PLR na pasta do teu GTR2 depois>GTR2\UserData\(o nome do teu piloto)

Depois tens que editar o ficheiro com um prog qq de texto, tipo wordpad ou assim. Depois tens q procurar essa linha q começa por FFB e substituir com esse que te enviei!

Abraço
[Image: bentobanner2.jpg]
Reply
#7
Boas!

Através de GTR2\UserData\ "o nome que criaste" \ "O mesmo nome.PLR"

Podes abrir o ficheiro utilizando o WORDPAD

Quanto a seres mais lento com o volante, não te preocupes. Precisas de te habituar ao volante e isso leva o seu tempo.

:fixe:


Boa Fernando, 1m mais rápido!!!! :laugh::laugh::laugh::laugh::laugh::laugh:
Reply
#8
Desculpem mas isto é para o Momo Racing ou o Momo Force?

Eu tenho um Momo Racing,... se não for estas config agradecia se mas podessem fornecer! :fixe:
[Image: sigjpgwf9.jpg]
Reply
#9
Boas Nuno,

É para o Momo Force. De qq forma experienta pois as diferenças são minimas.

Abraço
[Image: bentobanner2.jpg]
Reply
#10
Eu configurei por aqui, ja agora nao especifiquei mas o meu e o momo racing. (preto).

De qualquer forma o volante ficou melhor, so da um pouco de trabalho porque nas configuracoes nao sao muito exactas, havia alturas em que simplesmente nao sentia o carro, outras que precisava em que e preciso suar para conseguir manusear o carro.

Agora acabei por encontrar um ponto em que admito nao ser o melhor para fazer grandes tempos mas sim aquele que me parece ser mais real e que me da mais gozo conduzir...
[Image: MR-Corse-logo.png]
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Settings .plr-DFP Sergio_Junior 5 2.605 11-02-2007, 10:59 PM
Last Post: JRodrigues

Forum Jump:


Users browsing this thread: 1 Guest(s)