GT LEGENDS - Portal dos classicos

[Carlos Oliveira]

Será que alguém me pode dar uma ajuda, não consigo entrar no servidor. Eu uso o vista ultimate 64 e o meu ficheiro host que neste caso tem o nome imhosts.sam está assim:

# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
#
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:<domain>
# #INCLUDE <filename>
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
#
# Following an entry with the "#DOM:<domain>" tag will associate the
# entry with the domain specified by <domain>. This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The <domain> is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE <filename>" will force the RFC NetBIOS (NBT)
# software to seek the specified <filename> and parse it as if it were
# local. <filename> is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
#
# The following example illustrates all of these extensions:
#
# 102.54.94.97 rhino #PRE #DOM:networking #net group's DC
# 102.54.94.102 "appname \0x14" #special app server
# 102.54.94.123 popular #PRE #source server
# 102.54.94.117 localsrv #PRE #needed for the include
#
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
#
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
#
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.

81.3.59.61 www.gtl-server.net

[David Ribeiro]

Boas

no meu caso com Windows XP retirei o "http://" ficou apenas "www.gtl-server.net" e pronto ficou a funcionar.

Abraço
Ribeiro

[Carlos Oliveira]

Isso também eu já fiz e mesmo assim continua a não dar.

[Quiksilver]

Isso também eu já fiz e mesmo assim continua a não dar.

Boas.
No meu caso tive que fazer um flush à cache dns:

"Most DNS clients cache the results of name resolution requests. This speeds up name resolution if multiple lookups are done to the same address, such as is common when browsing the web.

Sometimes a bad DNS entry will be cached and you will need to either flush the DNS cache to get rid of it, or wait up to 24 hours for it to be dropped from the cache automatically.
How to Flush DNS in Microsoft Windows

In Microsoft Windows, you can use the command ipconfig /flushdns to flush the DNS resolver cache:

C:\>ipconfig /flushdns

Windows IP Configuration

Successfully flushed the DNS Resolver Cache.

You can also use the command ipconfig /displaydns to view the DNS resolver cache. "

Tenta assim.

[Carlos Oliveira]

Isso também eu já fiz e mesmo assim continua a não dar.

Boas.
No meu caso tive que fazer um flush à cache dns:

"Most DNS clients cache the results of name resolution requests. This speeds up name resolution if multiple lookups are done to the same address, such as is common when browsing the web.

Sometimes a bad DNS entry will be cached and you will need to either flush the DNS cache to get rid of it, or wait up to 24 hours for it to be dropped from the cache automatically.
How to Flush DNS in Microsoft Windows

In Microsoft Windows, you can use the command ipconfig /flushdns to flush the DNS resolver cache:

C:\>ipconfig /flushdns

Windows IP Configuration

Successfully flushed the DNS Resolver Cache.

You can also use the command ipconfig /displaydns to view the DNS resolver cache. "

Tenta assim.

No meu caso aparece:
C:\>ipconfig /flushdns
A operação pedida requer elevação.

Não percebo o que é que o windows querdizer com isto.

[Quiksilver]

Eu uso o XP. Não tive esse problema.
Agora com o Vista não sei...

Encontrei isto, vê se resolve:

Here is how to fix that corrupted DNS cache in vista.

1. Click the Microsoft Vista Start logo in the bottom left corner of the screen
2. Click All Programs
3. Click Accessories
4. RIGHT-click on Command Prompt
5. Select Run As Administrator
6. In the command window type the following and then hit enter: ipconfig /flushdns
7. You will see the following confirmation:

Windows IP Configuration
Successfully flushed the DNS Resolver Cache.

[Carlos Oliveira]

Já consegui fazer o flush DNS mas mesmo assim não consigo entrar no servidor. A porcaria do vista 64 deve estar a atrofiar isto tudo.

[Quiksilver]

Tens firewall ligada? Não estou a ver mais nada que possa ser...

[R.Cirne]

Então ha alguma novidade em relaçao a copa?

[Rui Cunha]

Pré inscrição.

http://www.simracingportugal.net/showthr...p?tid=9376

Estou a espera de data do servidor, para uma corrida de teste.

Penso que já todos acabaram as férias.

Já falta pouco.


Divulgem pelo portal